Home > Tractor Attachments >

Bellon Brush Mower
Bellon Brush Mower


 
Alternative Views:
Retail Price: $1,699.00
Dailey's Farm Price: $1,595.00
Savings: $104.00



Availability:: Usually Ships in 3 to 5 Business Days
Product Code: MDS700
Qty:

Description Technical Specs
 
The importer calls this a "Super-duty" brush mower, due to the following features: Cast-Iron gearbox housing with hardened steel gears and ball bearings in oil bath. Input shaft housing is designed with an oscillating swivel so that deck “floats”, or follows the contour of the ground, independent of the tractor axle, and also has “leveling springs” to help offset the torque of the PTO shaft through this swivel. Cut material comes out under series of hanging chains (just like a BIG bush-hog — chains never dry-rot or need replacement!) in the rear of mower. Front mower "opening" of this mower is NOT adjustable like the BCS, however the size of the opening is good and this is not a problem. Cutting height adjustable from 2.5 to 4” by moving the skids up or down with 4 nuts. (Although, to meet current safety standards for brush mowers, the blades must cut at 4” high. So, if you adjust for a lower cutting height, it is at your own risk!!) Blades are designed to be flipped over, for more life. Blade carrier disk even comes with 2 extra blade-mounting holes, so if you bash into enough rocks enough to deform the original set of holes, you can just move to the “spare” holes. Available Sizes: 28" to fit both BCS and Grillo (G110)

Accessory Note: We recommend a minimum of 5" x 10" x 20" with any brush mower. But 5'' x 12'' x 22" wheels (or larger) are optimal. This does depend upon tractor model. The extra wheel height will provide more ground clearance for the engine that is needed in rough areas.

Share your knowledge of this product. Be the first to write a review »